Dplyte
Accurate and Precise Electrolyte Analyzer
The DpLyte ISE bench top Electrolyte Analyzer, fully automatic analyzer with nine interchangeable electrolyte configurations measures Na+, K+, Cl-, Ca and Li+.
* Simple operation, user friendly and low maintenance.
* Zero-maintenance electrodes, single-pump design and simple fluidics path.
* Auto Calibrations and Auto Checking of electrodes ensure accurate and precise readings every time. All 3 Calibrations Solutions and testing materials are packaged into a safe, convenient and easy to use Fluid Pack.
* Sample: 95 μl Whole Blood, Serum, Plasma, Urine or Dialysate.
* Analysis Time: 60 sec without printout (60 per hour) ; 75 sec with printout (48 per hour).
* Sample Rate: 60 samples/hour without printout; 48 samples/hour with printout.
* Detection Range:
Blood
Na+: 40-200 mmol/L, Dialysate K+: 1.7-15 mmol/L, Cl-: 50-200 mmol/L, Ca++: 0.3-5.0 mmol/L, Li+: 0.2-5.5 mmol/L.
Urine
Na+: 3-300 mmol/L, K+: 5-120 mmol/L (60-120 requires additional dilution), Cl-: 15-300 mmol/L.
* Calibration: 2 point every 4 hours; 1 Point after every Measurement.
* Reproducibility:
Within Run (n=30)
Blood, Serum, Plasma, Dialysate
Na+: CV ≤ 1% (120-160 mmol/L)
K+: CV ≤ 2% (2.5-6 mmol/L)
Cl-: CV ≤ 2% (85-130 mmol/L)
Ca++: SD ≤ 0.02 mmol/L (0.8 – 1.5 mmol/L)
Li+: SD ≤ 0.02 mmol/L (0.4 – 1.3 mmol/L)
(Lithium not typically measured in dialysate samples)
Urine
Na+: CV ≤ 5% (100-250 mmol/L)
K+: CV ≤ 5% (10-60 mmol/L)
Cl-: CV ≤ 5% (100-250 mmol/L)
(Calcium and Lithium are not typically measured in urine samples)
* Data Storage: 1000 Patient Results; 500 Level 1 QC Results; 500 Level 2 QC Results; 500 Level 3 QC Results.
* Language: English, Chinese, French, German, Italian, Japanese, Portuguese, Russian, Spanish,Korean, Polish.
* Interface: RS-232
* Ambient Condition: 15-32°C, Room temperature (60-90°F); 5% to 85%, non-condensing.
* Power: 100-240V ~ 50/60 Hz (self adjusting); 1.6 A max, 50 Watts max.
* Dimension: 12.4W x 12.0D x 13.2H in.
* Weight: 14 lbs or 6 Kg.